High-Tech, High-Value Cleaning Answers Made Easy With KYZEN’s Tech-2-Tech
November 19, 2020 | Pete Starkey, I-Connect007Estimated reading time: 2 minutes
Thanks to KYZEN’s Tech-2-Tech initiative, I’ve been taking the opportunity to broaden my knowledge of the fundamentals of cleaning electronic assemblies.
Tech-2-Tech offers a wide-ranging selection of well-chosen topics, covering diverse aspects of selecting, evaluating, operating, and maintaining cleaning processes. These were clearly explained in a series of focused 15-minute sessions, each one presented by a different member of KYZEN’s team of industry experts. It’s amazing how much practical information can be effectively transferred and explained in a 15-minute slot, especially one that’s cleverly designed to fit conveniently into the working day with minimum disruption and includes time to grab a coffee!
The series began back in July, led by KYZEN Executive Vice President Tom Forsythe exploring the expectations of a cleaning process and the relative merits of short-term evaluation versus extended field trial for real-life characterisation. “Cleaning products must clean,” he remarked, “Cleaning agents must touch the dirt, and contaminants must be managed.”
Without getting buried in scientific detail, Forsythe described traditional cleaning technology and compared it with the complexity of soils currently encountered, the consequent complexity of the processes required to remove them, and the critical importance of effective rinsing. “It’s about balance and strength—enough solvency power to clean and enough pH to manage the soils and keep them in solution.”
Forsythe also discussed the dynamics of the cleaning process, particularly when operating in a real-world scenario, and the value of gathering and reviewing all the data from a trial before making production decisions. “It’s a long journey, with some ups and downs and some bends in the road. Some days, it rains!”
Subsequent sessions have included discussion of the five forces of cleaning; the significance of pH and how to maintain it; the importance of rinsing; the causes, consequences, and avoidance of foaming; optimisation of cleaner concentration; manual concentration monitoring and the benefits of automated monitoring; determination of process bath life, and overcoming the challenges of cleaning under low-stand-off tight-pitch components.
Recordings of all of these past sessions are readily accessible on-demand online, together with downloads of the corresponding Q&A sessions—practical answers to sensible questions! And, of course, the KYZEN team are always available to respond to any further queries which may subsequently arise.
Still to come, on December 3 at 3:18 p.m. GMT and December 4 at 1:33 a.m. GMT (the alternative time slots to align with North American, European, and Asian time zones) will be Jack Reinke’s session on the environmental impact of a PCB cleaning agent: its potential effect on the waste stream and whether or not to put spent process solution down the drain. A definite date for our diaries!
For those whose primary interest is metal finishing, KYZEN provided a full alternative programme with each session focused on a specific aspect of cleaning in metal finishing. To KYZEN’s great credit, the Tech-2-Tech initiative provides an intelligently constructed agenda of no-nonsense practical information, advice, and guidance for the benefit of decision-makers, engineers, and technical staff engaged in electronics assembly.
Presented in plain language with interesting analogies, KYZEN’s webinar supplies a wealth of valuable information, presented in an informal and easily assimilated style, with intelligent answers to intelligent questions, refreshingly free from commercial promotion.
I have greatly enjoyed the experience and look forward to the next chapter.
Register today at Tech2TechbyKYZEN.COM.
Suggested Items
Koh Young Showcases Award-winning Inspection Solutions at SMTconnect with SmartRep in Hall 4A.225
04/25/2024 | Koh Young TechnologyKoh Young Technology, the industry leader in True 3D measurement-based inspection solutions, will showcase an array of award-winning inspection and measurement solutions at SMTconnect alongside its sales partner, SmartRep, in booth 4A.225 at NürnbergMesse from June 11-13, 2023. The following offers a glimpse into what Koh Young will present at the tradeshow:
Real Time with… IPC APEX EXPO 2024: Plasmatreat: Innovative Surface Preparation Solutions
04/25/2024 | Real Time with...IPC APEX EXPOIn this interview, Editor Nolan Johnson speaks with Hardev Grewal, CEO and president of Plasmatreat, a developer of atmospheric plasma solutions. Plasmatreat uses clean compressed air and electricity to create plasma, offering environmentally friendly methods for surface preparation. Their technology measures plasma density for process optimization and can remove organic micro-contamination. Nolan and Hardev also discuss REDOX-Tool, a new technology for removing metal oxides.
KYZEN to Promote Pair of Stencil Cleaning Chemistries at SMTA Ciudad Jaurez Expo & Tech Forum
04/25/2024 | KYZEN'KYZEN, the global leader in innovative environmentally friendly cleaning chemistries, will exhibit at the SMTA Ciudad Juarez Expo & Tech Forum, scheduled to take place Thursday, May 9, 2024 at the Injectronic Convention Center in Ciudad Jaurez, Chihuahua, Mexico. During the event the KYZEN Clean Team will focus on understencil cleaning products KYZEN E5631J and CYBERSOLV C8882.
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.