Moving From 28 Gbps NRZ to 56 Gbps PAM-4: Is it a Free Lunch?
September 24, 2018 | Yuriy Shlepnev, SimberianEstimated reading time: 1 minute
The usual way of signaling through PCB interconnects is a two-level pulse, an encoding of 1s and 0s or bits, named NRZ (non-return-to-zero) or PAM-2 line code type. Increasing the data rate with the NRZ code type presents some obstacles. For a 28 Gbps NRZ signal, the bit time is about 35.7 ps with the main spectral lobe below 28 GHz. For a 56 Gbps NRZ signal, the bit time is about 17. 86 ps, with the main spectral lobe below 56 GHz.
One can feel the problem already: Getting PCB interconnect analysis and measurements up to 56 GHz and beyond is very challenging, to say the least. In addition, the expected attenuation (dielectric, conductor and roughness losses) would also be an obstacle for 56 GHz NRZ. To reduce the bandwidth of the signal, pulse amplitude modulation with four levels (PAM-4) is being used more frequently on production boards.
Instead of single bits, symbols 00, 01, 10, and 11 are coded by four levels of the pulse and the symbol time is twice as large as the bit time for NRZ signal with the same data rate; that is about 35.7 ps for 56 Gbps PAM-4—the same as for 28 Gbps NRZ! If we know how to design interconnects that correlate with the measurements for 28 Gbps NRZ, is it going to be a free lunch to move to 56 Gbps NRZ?
To read this entire article, which appeared in the August 2018 issue of Design007 Magazine, click here.
Suggested Items
Real Time with... IPC APEX EXPO 2024: Industrial Quality Solutions from Zeiss
04/23/2024 | Real Time with...IPC APEX EXPOEditor Nolan Johnson and Herminso Gomez of Zeiss Group discuss the company's industrial quality solutions, with a focus on X-ray technology. Zeiss provides a range of microscopy options and Herminso highlights the advantages of X-ray technology for aerospace, medical, and consumer electronics sectors.
Altair Acquires Cambridge Semantics, Powering Next-Generation Enterprise Data Fabrics and Generative AI
04/22/2024 | AltairAltair a global leader in computational intelligence, acquired Cambridge Semantics, a modern data fabric provider and creator of one of the industry’s leading analytical graph databases.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
04/19/2024 | Marcy LaRont, PCB007 MagazineFor my must-read picks of the week, I’m highlighting Parker Capers, a young professional seeking employment, solid counsel from Dan Beaulieu on what your post-show plan should look like, more information and insight on “chiplets” and the need for secure data transfer standards from columnist Preeya Kuray, as well as Matt Stevenson’s design for reality wisdom. It’s a reminder to download one of our newest books (there are several) you don't want to miss if you are an assembler.
D Coupon Testing and Data Insights With GreenSource Fabrication
04/17/2024 | Marcy LaRont, PCB007 MagazineMarcy LaRont spoke with Steve Karas of GreenSource Fabrication at the SMTA UHDI conference in March. He presented a case study that GreenSource undertook with a customer on critical via reliability with advanced materials and used the experience to highlight the importance and effectiveness of D coupon testing. He also discussed GreenSource’s approach to data aggregation and a new system they developed to use collected data effectively.
Real Time with... IPC APEX EXPO 2024: Innovations in Thermal, Warpage, and Strain Metrology
04/17/2024 | Real Time with...IPC APEX EXPOEditor Nolan Johnson talks with Neil Hubble, president of Akrometrix, about the company's leadership in thermal, warpage, and strain metrology. Neil details how Akrometrix is committed to addressing customer challenges through technological evolution, innovative solutions, and a focus on data processing. A tabletop unit for thermal warpage testing is showcased at IPC APEX EXPO this year.