BGA Fanout Routing Overview
September 4, 2018 | Christian Keller, AltiumEstimated reading time: 1 minute
PCB developers are deluged with new challenges caused by increasing density and smaller components. Ball grid arrays (BGAs) create particular challenges during layout, with hundreds of connections in just a few square centimeters. Fortunately, designers now have options for addressing these issues.
Fanout and Escape Routing
Because of the density and distance from the connection points, only the two outermost rows of a BGA can be connected directly to surface circuit traces. All other terminals of the BGA cannot be connected in a direct path on the surface.
Fanout and escape routing is integrated in many PCB design systems to enable further connections. In fanout and escape routing, the two outermost rows, and all other rows of a BGA, are automatically connected to the center of the terminals via a short circuit trace that is executed at a 45° angle. This provides a blind via that forms a direct connection to the next signal layer. Routing can be executed on the next signal layer.
Using via-in-pad eliminates the need for the additional trace to the center of the connections, thereby creating additional space for circuit traces. Therefore, with via-in-pad, the through contact can be placed directly at the terminal of the BGA.
During circuit board manufacturing, these through contacts will be filled with a non-conducting medium and cured. Later, the ends are metallized, planarized, and also over-contacted. This makes the surface of the via flat and can be used the contacts of the BGA. This solution can be used for both stacked and staggered microvias and/or blind vias. IPC-4761 describes how via-in-pads, for example filled and capped vias (IPC-4761 Type VII), are prepared. Despite the higher manufacturing costs, via in pads will always be preferred, because of the higher integration density of BGAs and their lower inductance at high frequencies (signal quality).
To read this entire article, which appeared in the August 2018 issue of Design007 Magazine, click here.
Suggested Items
Real Time with... IPC APEX EXPO 2024: Exploring IPC's PCB Design Courses with Kris Moyer
04/18/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and IPC instructor Kris Moyer discuss IPC's PCB design training and education offerings. They delve into course topics such as design fundamentals, mil/aero, rigid-flex, RF design, and advanced design concepts. They also highlight material selection for high-speed design, thermal management, and dissipation techniques. The interview wraps up with details about how to access these courses online.
IPC Bestows Posthumous Hall of Fame Award to Industry Icon Michael Ford
04/18/2024 | IPCIPC honored the late Michael Ford, Aegis Software, for his extraordinary contributions to the global electronics manufacturing industry with the IPC Raymond E. Pritchard Hall of Fame Award at IPC APEX EXPO 2024. IPC’s most prestigious honor, the Hall of Fame Award is given to individuals who have provided exceptional service and advancement to IPC and the electronics industry. Ford, an industry leader and valued IPC volunteer, died suddenly in January 2024.
Two Industry Rising Stars Recognized at IPC APEX EXPO 2024
04/17/2024 | IPCTwo of the industry’s best and brightest were presented with an IPC Rising Star Award at IPC APEX EXPO 2024 in recognition of their leadership roles and support of IPC standards, education, advocacy, and solutions to industry challenges. Award recipients were Naim Kapadia and Michael Schleicher.
Two Long-time IPC Volunteers Receive Dieter Bergman IPC Fellowship Award
04/17/2024 | IPCThe Dieter Bergman IPC Fellowship award was presented to two IPC volunteers at IPC APEX EXPO 2024. The award recipients have fostered a collaborative spirit, made significant contributions to standards development, and have consistently demonstrated a commitment to global standardization efforts. Tiberiu Baranyi and Zhiman Chen were chosen as award recipients as they embody the work ethic and spirit of the late Dieter Bergman, an industry pioneer and icon. As part of the award, they bestowed Dieter Bergman Memorial Scholarships to the university or college of their choice.
Real Time with... IPC APEX EXPO 2024: MYCRONIC's Evolution and New Solutions
04/17/2024 | Real Time with...IPC APEX EXPOHenry Crandall interviews Kevin Clue, the vice president of global sales for MYCRONIC's High Flex division. They discuss the company's evolution, emphasizing its strong customer relationships and its role as a versatile, turnkey solution provider. Kevin unveils new solutions launched at IPC APEX EXPO, including an AI-integrated inspection system and the A40 pick-and-place platform. The conversation also touches on the increased use of AI and deep learning.