-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Design Guidelines for Flexible Printed Circuits
February 15, 2024 | Chris Keirstead, PFC Flexible CircuitsEstimated reading time: 1 minute
An important but sometimes overlooked aspect of flex and rigid-flex fabrication and assembly is the flex circuit tail, which is attached to a rigid PCB with pressure-sensitive conductive adhesives. This sub-assembly is becoming very common. We often see this applied to glass displays and microelectronic applications.
But this method of attachment without connectors is not as straightforward as one may think. The wide varieties of circuitry to be bonded create many attachment challenges. The best track configuration is not always possible, so one must be familiar with the optimum layouts as well as what is not recommended when considering these trade-offs. Less than optimum trace and pad layouts result in the need for more customization and smaller processing window variations for the bonding process.
Here are some common configurations that flex assemblers have developed, and the preferred approach for the method of bonding.
Interposer Effect and Co-planarity Adjustment
Bonding imbalance results from either bad co-planarity between the bonder head and stage or a thickness deviation of the flex and PCB materials. The interposer will absorb these discrepancies to some extent and help bring the bonding results in parallel.
To read this entire article, which appeared in the February 2024 issue of Design007 Magazine, click here.
Suggested Items
Airbus Finalises Acquisition of Aerovel and Its UAS Flexrotor
05/10/2024 | AirbusAirbus has finalised the acquisition of U.S.-based Aerovel and its unmanned aerial system (UAS), Flexrotor, in a move to strengthen its portfolio of tactical unmanned solutions.
All Flex Solutions Hires Mike Madetzke as Manager of R&D
05/08/2024 | All Flex SolutionsAll Flex Solutions is very pleased to announce that Mike Madetzke has joined their team as their new Manager of Research and Development.
Flex Announces Upcoming Changes to Its Board of Directors
05/07/2024 | FlexFlex announced that consistent with its succession plan, Michael D. Capellas, non-executive Chair of the Board of Directors of Flex, has informed the Board of his decision not to stand for re-election to the Board at the company's 2024 Annual General Meeting of shareholders to be held on August 8, 2024. Mr. Capellas has served on the company's board for 10 years, including as Chair since 2017, during which time he played a key role in building Flex's reputation as a trusted global technology, supply chain and manufacturing solutions partner and driving the company's success.
NextFlex Convenes the Hybrid Electronics Community at Binghamton University
05/01/2024 | NextFlexBinghamton University hosted the NextFlex hybrid electronics community on April 18 for a day of expert presentations, breakout sessions on technology and manufacturing topics, and networking.
Merlin Flex invests in New Schmoll Direct Imaging System
04/30/2024 | Merlin Flex LtdMerlin Flex has fully installed and commissioned its 2nd Schmoll MDI Direct Imaging system. This new machine includes a twin bed, 4 head system which enhances Merlin Flex’s direct imaging capability for its 1.4M long flexible circuits.